OS GSO ISO/TR 14799-1:2013

ISO/TR 14799-1:2005
Omani Standard   Current Edition · Approved on 01 April 2013

Comparison of worldwide escalator and moving walk safety standards --Part 1: Rule by rule comparison

OS GSO ISO/TR 14799-1:2013 Files

English 226 Pages
Current Edition Reference Language

OS GSO ISO/TR 14799-1:2013 Scope

This Technical Report consists of a comparison of the requirements of selected topics as covered by the following world-wide safety standards (excluding local deviations): a) Europe (CEN) – EN 115; Safety rules for the construction and installation of escalators and passenger conveyors (Edition January 1995 and amendment A1: 1998); b) USA – ASME A 17.1-1996; Safety Code for Elevators and Escalators NOTE The requirements for Canada (B 44) are generally the same as for the USA. Any differences are stated in the text. c) Australia – AS 1735 parts 5 and 6 for escalators and moving walks (Edition 1996); d) Japan – Safety requirements mainly comprised of Building Standard Law Enforcement Order (BSLJ-EO), Notifications of Ministry of Construction (MOC-N, No. 1110-1981) and draft of Japan Elevator Association Standard (JEAS); e) Russia – PUBEE 10-77-94, Regulations for the installation and safe use of escalators (Edition 1995); f) Korea –The Elevator Inspection Standards, KATS 2001-414 Edition according to the Korea Elevator Law 4482, both cover the safety requirements on the escalator and moving walk. It should be noted that in addition to the above listed standards and other regulations, escalators and moving walks may be required to conform to the requirements of other standards as appropriate. Where ISO/TC 178/WG 5 was aware of these standards they are mentioned in the bibliography

Best Sellers From Mechanical Sector

OS GSO 42:2015
GSO 42:2015 
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993 
Omani Standard
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS

Recently Published from Mechanical Sector

GSO EN 131-3:2018+A1:2026
EN 131-3:2018+A1:2025 
Gulf Standard
Ladders - Part 3: Marking and user instructions
OS GSO EN 17860-1:2026
EN 17860-1:2024 
Omani Standard
Carrier cycles - Part 1: Terms and definitions
OS GSO ISO 17987-3:2026
ISO 17987-3:2025 
Omani Standard
Road vehicles — Local Interconnect Network (LIN) — Part 3: Protocol specification
OS GSO EN 17860-2:2024+A1:2026
EN 17860-2:2024+A1:2026 
Omani Standard
Carrier Cycles - Part 2: Lightweight single track carrier cycles - Mechanical aspects